Windows® Device Manager Conflicts - LG enV3 VX9200
Is this helpful?  
Cancel  

Windows® Device Manager Conflicts - LG enV3 VX9200

Start Device Manager.

  • Windows 8
    • Right-Click Start Screen > All Apps > Control Panel > System and Security > Device Manager.
  • Windows 7
    • Click Start > Control Panel > System and Security > Device Manager.
  • Windows Vista
    • Click Start > (Settings) Control Panel > (System and Maintenance) > Device Manager.
      Note If prompted, click Continue.
  • Windows 2000 / XP
    • Click Start > (Settings) Control Panel > (Performance and Maintenance) > System > Hardware > Device Manager.

For detailed instructions, refer to Opening Windows Device Manager.

The following devices are normally installed:

Modems
LGE CDMA USB Modem
Ports (COM & LPT)
LGE CDMA USB Serial Port (COM x)
Universal Serial Bus controllers
LGE CDMA Composite USB Device
Device Manager
Note If a conflict is present, a red X, yellow ! or yellow ? is displayed to the left of a listed device or may be indicated by a device entry labeled Other Devices or Unknown. The drivers must be updated or reinstalled.
Conflict

If a conflict is present:

  1. Ensure that the device drivers are installed. Refer to Installing USB drivers or Installing V CAST Music with Rhapsody for further assistance.
    Note If the device drivers are installed and a conflict is still present, continue to step 2.
  2. Right-click the device then click Update Driver Software.
    Note If using Windows 2000 / XP, right-click the device then click Update Driver.
    Update driver
  3. Click Browse my computer for driver software.
    Note If using Windows 2000 / XP, select Install from a list or specific location (Advanced) then click Next.
    Browse to driver
  4. Enter C:\Program Files\LG Electronics\LG USB Modem Driver into the search window then click Next.
    Note If using Windows 2000 / XP, ensure that Search for the best driver in these locations and Include this location in the search are selected.
    Note The driver location can be entered manually or navigated to by clicking Browse.
    Update location
  5. Click Close.
    Note If using Windows 2000 / XP, click Finish.
    Update complete
Last Modified: November 16, 2012
Is this helpful?  
Cancel