USB Debugging Mode - DROID ERIS by HTC
If your computer/PC doesn't recognize your wireless device / USB when it's inserted/connected, this may help. Our Troubleshooting Assistant can help you with other device issues if you aren't currently using the tool.
USB debugging is intended for development purposes only. It can be used to copy data between the computer and the device, install applications on the device without notification, and read log data.
- From the home screen, touch the applications tab (located in the lower left).
- Touch Settings.
- Touch Applications.
- Touch Development.
- Touch USB debugging to enable / disable.
Enabled when a green check mark is present.
- If prompted, touch OK.