Wireless Network Security Settings - Jetpack 4G LTE Mobile HotSpot MiFi 4510L
Is this helpful?  
Cancel  

Wireless Network Security Settings - Jetpack 4G LTE Mobile HotSpot MiFi 4510L

  1. Access the Administration Page.
  2. From the Home screen, select Wi-Fi.
    Home screen, Wi-Fi
  3. Ensure the appropriate options are selected then click Apply.
    • Selected Profile
      Open
      No Wireless security is possible.
      Secure
      Wireless security must be enabled.
      Temporary Hotspot
      Security is enabled, and the network name (SSID) and security key are auto-generated.

    • Network Name (SSID)
      Each profile must have a unique name.
      Enter the desired Network Name (SSID)
    • 802.11 Mode
      802.11g
      802.11b
      802.11n
      802.11g + 802.11b + 802.11n
    • WMM (Wi-Fi Multimedia)
      WMM is mandatory if using 802.11n.
      Off
      On - Standard
      Backward compatibility
    • Channel
      If available, the Auto setting is recommended.
      Select the appropriate channel.
      Auto & 1 through 11
    • Security
      WEP 64-bit
      WEP 128-bit
      WPA Personal / PSK (TKIP)
      WPA2 Personal / PSK (AES)
      WPA / WPA2 Personal Mixed Mode
    • Network Key
      Note The password to access the Wi-Fi network depends upon the Security option selected.
      • WEP 64-bit - 5 ASCII characters or 10 HEX characters.
      • WEP 128-bit - 13 ASCII characters or 26 HEX characters.
      • WPA Personal / PSK (TKIP) - ASCII string, 8 to 63 characters in length.
      • WPA2 Personal / PSK (AES) - ASCII string, 8 to 63 characters in length.
      Caution If the network key is changed, the network settings on the computer must updated. For additional assistance, select the appropriate operating system:
      Macintosh OS X
      Windows 7
      Windows Vista
      Windows XP
    Wi-Fi settings
Last Modified: February 7, 2012
Is this helpful?  
Cancel