Set Up Wi-Fi Connection - DROID CHARGE™ by SAMSUNG
Is this helpful?  
Cancel  

Set Up Wi-Fi Connection - DROID CHARGE™ by SAMSUNG

Note Local area Wi-Fi network information is needed to complete several steps. Please refer to the network administrator for additional assistance.

  1. From the home screen, select Applications.
    Home screen with Applications
  2. Select Settings.
    Applications with Settings
  3. Select Wireless & networks.
    Settings with Wireless & networks
  4. Select Wi-Fi settings.
    Wireless & networks with Wi-Fi settings
  5. Ensure Wi-Fi is enabled then select the preferred Wi-Fi network.
    Note Wi-Fi is Enabled when a check mark is present.
    Note If the preferred network is not displayed, refer to Add Wi-Fi network for assistance.
  6. Select Yes.
  7. If presented, enter the appropriate password / key then select Connect.
    Note To view the password as it is being entered, select Show password (enabled when a check mark is present).

 

 

Add Wi-Fi network

  1. Select Add Network.
    Wi-Fi settings with Add Network
  2. From the Network Name(SSID) field, enter the appropriate name.
    Add Network with Network SSID
  3. From the Security field, select the drop down menu.
    Add Network with Security drop down menu
  4. Select the appropriate security option.
    Note If using an Open network, skip to step 6.
    • Open
    • WEP
    • WPA/WPA2 Personal
    • 802.1x EAP
    Add Network with security options
  5. From the Key(Passphrase) field, enter the appropriate key / password.
    Note To view the password as it is being entered, select Show password (enabled when a check mark is present).
    Add Network with key / password
  6. Ensure additional settings (e.g. EAP method, Phase 2 authentication, CA certificate, etc.) are configured appropriately (if applicable) then select Save.
    Add Network with Save

 

 

Top

Last Modified: December 2, 2011
Is this helpful?  
Cancel