Set Up Wi-Fi Connection - Casio® G'zOne Commando™ (C771)
Is this helpful?  
Cancel  

Set Up Wi-Fi Connection - Casio® G'zOne Commando™ (C771)

Note Local area Wi-Fi network information is needed to complete several steps. Please refer to the network administrator for additional assistance.

  1. From the home screen, select the applications tab.
    Home screen with applications tab
  2. Select Settings.
    Applications with Settings
  3. Select Wireless & networks.
    Settings with Wireless & networks
  4. Select Wi-Fi settings.
    Wireless & networks with Wi-Fi settings
  5. Ensure Wi-Fi is enabled then select the preferred Wi-Fi network.
    Note Wi-Fi is enabled when a green check mark is present.
    Note If the preferred network is not displayed, refer to Add Wi-Fi network for assistance.
  6. If presented, enter the appropriate password / key then select Connect.
    Note To view the password as it is being entered, select Show password (enabled when a green check mark is present).

 

 

Add Wi-Fi network

  1. Select Add Wi-Fi Network.
    Wi-Fi settings with Add Wi-Fi Network
  2. From the Network SSID field, enter the appropriate name.
    Add Network with Network SSID
  3. From the Security field, select the drop down menu.
    Add Network with Security drop down menu
  4. Select the appropriate security option.
    • None
    • WEP
    • WPA/WPA2 PSK
    • 802.1x EAP
    Add Network with security options
  5. From the Password field, enter the appropriate password.
    Note To view the password as it is being entered, select Show password (enabled when a green check mark is present).
    Add Network with key / password
  6. Ensure additional settings (e.g. EAP method, Phase 2 authentication, CA certificate, etc.) are configured appropriately (if applicable) then select Save.
    Add Network with Save

 

 

Top

Last Modified: April 27, 2011
Is this helpful?  
Cancel