Set Up Wi-Fi Connection - Apple® iPhone® 4S
Is this helpful?  
Cancel  

Set Up Wi-Fi Connection - Apple® iPhone® 4S

VPN settings may not allow the device to connect to an unsecured Wi-Fi connection. The device may not indicate that a Wi-Fi connection has been ended due to this restriction. If available, the device resumes a 3G connection and data usage is incurred. Contact your VPN Administrator for more assistance.

Note Local area Wi-Fi network information is needed to complete several steps. Please refer to the network administrator for additional assistance.

Note To determine Device Software Version, refer to View Software Version.

Device Software Version iOS 6
Device Software Version iOS 7

 

Device Software Version iOS 6

  1. From the home screen, select Settings.
    Settings
  2. Select Wi-Fi.
    WiFi
  3. Drag the switch right to enable Wi-Fi.
    Enable WiFi

Join an existing Wi-Fi network
Add a Wi-Fi network

 

Join an existing Wi-Fi network

  1. From Choose a Network, select an available network.
    Select the name of the network, not the blue arrow.
    Choose network
  2. Enter the username and password then select Join.

 

Top

 

Add a Wi-Fi network

Note When re-adding a Wi-Fi network or if a network setting is in need of correction, it is recommended to remove the Wi-Fi network first. Refer to Remove Wi-Fi Connection - Apple iPhone 4S for assistance.
  1. From Choose a Network, select Other.
    Choose network
  2. Enter the Wi-Fi network name.
    WiFI network name
  3. Select Security.
    Select security
  4. Select the Wi-Fi network type then select Other Network.
    • WEP
    • WPA
    • WPA2
    • WPA Enterprise
    • WPA2 Enterprise
    Select security type
  5. Enter the Wi-Fi network password then select Join.
    Enter password then join

 

Top

 

Device Software Version iOS 7

  1. From the home screen, select Settings.
  2. Select Wi-Fi.
  3. Select and drag the Wi-Fi switch to enable.
    Note Enabled when the switch is in the green position.

Join an existing Wi-Fi network
Add a Wi-Fi network

 

Join an existing Wi-Fi network

  1. From Choose a Network, select an available network.
    Select the name of the network, not the blue arrow.
  2. Enter the username (if prompted) and password then select Join.

 

Top

 

Add a Wi-Fi network

Note When re-adding a Wi-Fi network or if a network setting is in need of correction, it is recommended to remove the Wi-Fi network first. Refer to Remove Wi-Fi Connection - Apple iPhone 4S for assistance.
  1. From Choose a Network, select Other.
  2. Enter the Wi-Fi network name.
  3. Select Security.
  4. Select the Wi-Fi network type then select Back.
    • None
    • WEP
    • WPA
    • WPA2
    • WPA Enterprise
    • WPA2 Enterprise
  5. Enter the Wi-Fi network password then select Join.

 

Top

Last Modified: September 18, 2013
Is this helpful?  
Cancel