GPS over Wi-Fi - Verizon Jetpack® 4G LTE Mobile HotSpot - MiFi® 4620L
Is this helpful?  
Cancel  

GPS over Wi-Fi - Verizon Jetpack® 4G LTE Mobile HotSpot - MiFi® 4620L

Note The GPS over Wi-Fi setting allows the MiFi device to provide a GPS (NMEA) stream to a Windows or Mac computer. This is only useful if running an application that is capable of utilizing a NMEA GPS stream (e.g. Microsoft Streets & Trips, DeLorme Street Atlas).

Note To utilize GPS over Wi-Fi, a driver must be installed on the computer.

  1. Access the Administration Web Interface.
  2. From the Advanced tab, click Settings.
    Advanced tab with Settings
  3. From the Router section, select GPS over Wi-Fi (NMEA).
    Note Enabled when a check mark is present.
    Note If presented, review the agreement then click Ok to continue.
    Router section with GPS over Wi-Fi (NMEA)
  4. Click Save.
    Advanced Settings with Save
  5. If GPS over Wi-Fi (NMEA) is enabled, launch the GPS-enabled application on the computer then configure it to utilize a NMEA port or GPS receiver.
    Note Refer to the application's help menu or contact the application developer for assistance.
    Note Once the application has found the NMEA port / GPS receiver, it should report 'Waiting for GPS' or similar until a GPS fix is obtained. After that, it will use or display the current GPS location.

 

 

Download GPS over Wi-Fi (NMEA) driver

  1. Access the Administration Web Interface.
  2. From the Advanced tab, click Settings.
    Advanced tab with Settings
  3. From the Router and GPS over Wi-Fi (NMEA) sections, click How to use this feature.
    Router section with GPS over Wi-Fi (NMEA)
  4. From the Driver Installation section, click USB and GPS Driver for Windows then follow the step-by-step instructions to complete installation.
    Driver Installation links and instructions

 

 

Top

Last Modified: July 18, 2012
Is this helpful?  
Cancel