Enable/Disable/Modify the SIM PIN - Verizon Jetpack™ 4G LTE Mobile HotSpot - MiFi® 4620L
Is this helpful?  
Cancel  

Enable/Disable/Modify the SIM PIN - Verizon Jetpack™ 4G LTE Mobile HotSpot - MiFi® 4620L

Note Enabling the Subscriber Identity Module (SIM) Personal Identification Number (PIN) locks the SIM card so that it cannot be used until the correct code is entered. If the incorrect PIN code is entered too many times, a PIN unlock key (PUK) must be obtained from Verizon Wireless.

  1. Access the Administration Web Interface.
  2. From the Network tab, click SIM.
    Network tab with SIM

Enable/Disable SIM PIN
Modify SIM PIN

 

Enable/Disable SIM PIN

  1. From the SIM Operation field, select Lock SIM / Unlock SIM.
    SIM Operation with Lock / Unlock SIM
  2. From the Current PIN field, enter the current SIM PIN then click Apply (located in the lower-left).
    Note The default SIM PIN is 1111.
    Note If the SIM has previously been blocked and subsequently reset using the PIN Unlock Key (PUK), the default SIM PIN is 0000.
    Current PIN with Apply

 

Top

 

Modify SIM PIN

Note The SIM card must be locked (SIM PIN enabled) in order to change the current SIM PIN.

  1. From the SIM Operation field, select Change PIN.
    SIM Operation with Change PIN
  2. Enter the appropriate PIN into the following fields then click Apply:
    Note The default SIM PIN is 1111.
    Note If the SIM has previously been blocked and subsequently reset using the PIN Unlock Key (PUK), the default SIM PIN is 0000.
    • New PIN
    • Verify New PIN
    • Current PIN
    New, Verify and Current PIN with Apply
  3. Click OK.
    Confirmation with OK

 

Top

Last Modified: December 27, 2013
Is this helpful?  
Cancel