Adding a Virtual Private Network - Apple® iPhone® 5S
Is this helpful?  
Cancel  

Adding a Virtual Private Network - Apple® iPhone® 5S

VPN settings may not allow the device to connect to an unsecured Wi-Fi connection. The device may not indicate that a Wi-Fi connection has been ended due to this restriction. If available, the device resumes a 4G connection and data usage may be incurred. Contact your VPN Administrator for more assistance.

Note Contact the VPN administrator for assistance with server information and credentials.

  1. From the home screen, select Settings.
    Settings
  2. Select General.
    General
  3. Select VPN.
    VPN
  4. Select the VPN switch to enable/disable.
    Note Enabled when the switch is in the green position.
    Enable disable VPN
  5. Select Add VPN Configuration.
    Add VPN Configuration
  6. Select the VPN type:
    L2TP
    Layer 2 Tunneling Protocol
    PPTP
    Point-to-point Tunneling Protocol
    IPSec
    Internet Protocol Security
    VPN type

 

L2TP

  1. Enter/Select the LT2P VPN information.
    • Description
    • Server
    • Account
    • RSA SecurID (On/Off)
      Note Enabled when the switch is in the green position.
    • Password
    • Secret
    • Send All Traffic (On/Off)
      Note Enabled when the switch is in the green position.
  2. Select the Proxy setting.
    • Off
    • Manual
    • Auto
  3. If Manual was selected, enter / select the proxy information.
    • Server
    • Port
    • Authentication (On/Off)
      Note Enabled when the switch is in the green position.
  4. If Auto was selected, enter the URL.
  5. Select Save (located in the upper-right).

 

Top

 

PPTP

  1. Enter/Select the PPTP VPN information.
    • Description
    • Server
    • Account
    • RSA SecurID (On/Off)
      Note Enabled when the switch is in the green position.
    • Password
    • Encryption Level
    • Send All Traffic (On/Off)
      Note Enabled when the switch is in the green position.
  2. Select the Proxy setting.
    • Off
    • Manual
    • Auto
  3. If Manual was selected, enter/select the proxy information.
    • Server
    • Port
    • Authentication (On/Off)
      Note Enabled when the switch is in the green position.
  4. If Auto was selected, enter the URL.
  5. Select Save (located in the upper-right).

 

Top

 

IPSec

  1. Enter/Select the IPSec VPN information.
    • Description
    • Server
    • Account
    • Password
    • Use Certificate (On/Off)
      Note Enabled when the switch is in the green position.
    • Group Name
    • Secret
  2. Select the Proxy setting.
    • Off
    • Manual
    • Auto
  3. If Manual was selected, enter/select the proxy information.
    • Server
    • Port
    • Authentication (On/Off)
      Note Enabled when the switch is in the green position.
  4. If Auto was selected, enter the URL.
  5. Select Save (located in the upper-right).

 

Top

Last Modified: September 16, 2013
Is this helpful?  
Cancel