Power Saver Settings - Lucid™3 by LG

Note When enabled, Power Saver mode disables or modifies taped settings upon reaching the specified battery power level.

  1. From a home screen, tap Apps Apps icon.
  2. From the Apps tab, tap Settings Settings icon.
  3. From the DEVICE section, tap Battery.
  4. Tap Battery saver.
  5. Tap Turn Battery saver on.
  6. Tap one of the following:
    • Immediately
    • 10% battery
    • 20% battery
    • 30% battery
    • 50% battery
  7. From the POWER SAVER ITEMS section, tap any of the following:
    Note Enabled when a check mark is present.
    • Auto-sync
    • Wi-Fi
    • Bluetooth
    • Vibrate on touch
    • Brightness
      1. If enabled, tap the settings icon located to the right.
      2. Tap one of the following then tap OK:
        • 10% brightness
        • 20% brightness
        • 30% brightness
        • 50% brightness
    • Screen timeout
      1. If enabled, tap the settings icon located to the right.
      2. Tap one of the following:
        • 15 seconds
        • 30 seconds
        • 1 minute
    • Touch key key light
      1. If enabled, tap the settings icon located to the right.
      2. Tap one of the following:
        • 1.5 seconds
        • Always off
    • Notification light
isTealiumFlag=true