Manually Add a Wi-Fi Network - DROID RAZR M by MOTOROLA / Luge™ by Motorola

Note Wi-Fi network info is required to complete several steps. Refer to the network administrator for assistance.

  1. From a Home screen, tap Apps.
  2. From the APPS tab, tap Settings.
  3. From the WIRELESS & NETWORKS section, tap Wi-Fi.
  4. Ensure the Wi-Fi switch (located in the upper-right) is turned ON.
  5. Tap Add network (plus (+) symbol located at the bottom).
  6. From the Network SSID field, enter the appropriate name.
  7. From the Security field, tap the dropdown menu.
  8. Tap the appropriate security option:
    Note If using an Open network (None), skip to step 10.
    • None
    • WEP
    • WPA/WPA2 PSK
    • 802.1x EAP
  9. From the Password field, enter the appropriate password.
    Note To view the password as it is being entered, tap Show password (enabled when a check mark is present).
  10. Ensure additional settings (e.g. EAP method, Phase 2 authentication, CA certificate, etc.) are configured appropriately (if applicable) then tap Save (located in the lower-right).

Related Topics: