USB Debugging Mode - HTC One® remix

If you need to facilitate a connection between your device and a computer with the Android SDK (software development kit), view this info.

Notes:

  • USB debugging is intended for development purposes only. It can be used to copy data between the computer and the device, install apps on the device without notification and read log data.
  • To access developer options, they must first be enabled.
 
Enable Developer Options.
  1. From a Home screen, tap Apps Apps icon (located at the bottom).
  2. Tap Settings.
    Note If unavailable, tap the dropdown menu Applications dropdown menu icon (located in the upper-left) then tap Alphabetical. If still unavailable, refer to Manage App Icons.
  3. From the SYSTEM section, tap About.
  4. Tap Software information.
  5. Tap More.
  6. Tap Build number then tap it seven times until "You are now a developer" appears at the bottom. 

 

Access Developer Options.

  1. From a home screen, tap Apps Apps icon (located at the bottom).
  2. Tap Settings.
    Note If unavailable, tap the dropdown menu Applications dropdown menu icon (beneath date/time) then tap Alphabetical. If still unavailable, refer to Manage App Icons.
  3. From the SYSTEM section, tap Developer options.
  4. If prompted, tap OK.
  5. Ensure the Developer options switch (located in the upper-right) is turned on Wi-Fi switch On icon.
  6. From the DEBUGGING section, tap USB debugging to enable/disable.
    Note Enabled when a check mark Checkbox icon is present.
    Note If presented with Allow USB debugging screen, tap OK.
isTealiumFlag=true