Insert SD / Memory Card - Casio G'zOne Commando® (C771)

Note This device supports a microSD (TransFlash) memory card. A memory card is included and pre-installed with the device. Additional microSD cards can be purchased from any Verizon Wireless retail store or at the online store.

  1. Ensure the device is powered off.
  2. Unlock the battery cover.
    Note Slide the switch to the free position.
    Unlock battery cover
  3. Remove the battery cover.
    Note Starting from the bottom of the device, carefully detach the cover as shown.
    Remove battery cover
  4. Remove the battery.
    Note Utilize the pull tab to lift the battery from the compartment.
    Remove battery
  5. Unlock the memory card cover.
    Note Press down (figure 1) then slide the cover to the open position (figure 2).
    Unlock memory card cover
  6. Raise the memory card cover.
    Note Rotate the cover upward.
    Raise memory card cover
  7. Insert the memory card into the memory card cover.
    Note Ensure the card slides all the way into place and that the gold contacts on the card align with the connectors on the device.
    Insert memory card
  8. Lower the memory card cover.
    Note Rotate the cover downward.
    Lower memory card cover
  9. Lock the memory card cover.
    Note Press down (figure 1) then slide the cover to the lock position (figure 2).
    Lock memory card cover
  10. With the pull tab facing up, insert the battery as shown.
    Note Ensure that the connectors on the battery align with the connectors on the device.
    Insert battery
  11. Replace the battery cover.
    Note Ensure the tabs at the top of the cover slide into place (figure 1) then press down as shown (figure 2).
    Replace battery cover
  12. Lock the battery cover into place.
    Note Press down at each arrow point.
    Lock battery cover into place
  13. Lock the battery cover.
    Note Slide the switch to the lock position.
    Lock battery cover

Related Topic: Remove the Memory Card

isTealiumFlag=true