Insert SD Card - Casio G'zOne Commando® 4G LTE

Note This device supports microSD (TransFlash) memory cards. MicroSD cards can be purchased from any Verizon Wireless retail store or at the online store.

  1. Ensure the device is powered off.
  2. Unlock the battery cover.
    Note Slide the switch to the free position.
    Unlock battery cover
  3. Remove the battery cover.
    Note Starting from the top right of the device, carefully detach the cover as shown.
    Remove battery cover
  4. Slide the orange bar to 'Free' and insert your finger in the groove to remove the battery.
    Note The orange slide bar must be set to Free (right) to lift the battery from the compartment.
    Remove battery
  5. Insert the memory card with the logo facing up and slide it into place until it is fully inserted in the memory card slot.
    Insert memory card into memory card slot
  6. Insert the battery as shown.
    Note Ensure that the connectors on the battery align with the connectors on the device.
    Insert battery
  7. Slide the battery lock to Lock (left) as shown.
    Battery Lock select Lock (left)
  8. Replace the battery cover.
    Note Insert the cover into the slots (1) and then press the battery cover in the direction of the arrow (2).
    Replace battery cover
  9. Lock the battery cover into place.
    Note Press down at each arrow point.
    Lock battery cover into place
  10. Lock the battery cover.
    Note Slide the switch to the lock position (down).
    Lock battery cover

Related Topic: Remove the Memory Card

isTealiumFlag=true