Wi-Fi network info is required to complete several steps. Refer to the network admin for assistance.
-
From a Home screen, tap Apps
(located in the lower-right).
These instructions apply to Standard mode only.
-
From the Apps tab, tap Settings.
-
Tap Wi-Fi.
-
Ensure the Wi-Fi switch (located in the upper-right) is turned on
then tap Add Wi-Fi Network (located at the bottom).
-
From the Network SSID field, enter the appropriate name.
-
From the Security field, tap the Dropdown menu
(located to the right).
-
Tap one of the following security options:
If using an Open network (None), skip to step 9.
-
None
-
WEP
-
WPA/WPA2 PSK/FT PSK
-
802.1x EAP
-
From the Password field, enter the appropriate password.
To view the password as it is being entered, tap (check) Show password.
-
Ensure additional settings (e.g. EAP method, Phase 2 authentication, CA certificate, etc.) are configured appropriately (if applicable) then tap Save.
Related Topics: