Layer_4
Created with Sketch.
Home
Support
Kyocera
Brigadier by Kyocera
Set Up Wi-Fi Connection - Brigadier by Kyocera
Set Up Wi-Fi Connection - Brigadier™ by Kyocera
Notes:
Local area Wi-Fi network information is needed to complete several steps. Please refer to the network administrator for additional assistance.
To setup a Wi-Fi connection,
Wi-Fi must be enabled
.
From a Home screen, tap
Apps
(at the bottom).
Tap
Settings
.
From the WIRELESS & NETWORKS section, tap
Wi-Fi
.
Select the preferred Wi-Fi Network.
If the preferred network is not displayed, refer to
Add Network
for assistance.
If presented, enter the appropriate password then tap
Connect
.
To view the password when you are entering it, tap
Show password
(green check mark).
Add Network
Tap
Options
(at the top-right).
Tap
Add network
.
Enter the Network SSID.
Tap the
Security dropdown
.
Select the appropriate Security option.
Supported security: WEP, WPA / WPA2PSK, 802.1x EAP.
Enter the identity (if presented) and the password or hex key then tap
SAVE
.
To view the password when you are entering it, tap
Show password
(green check mark).
isTealiumFlag=true