LG G3 - Insert SD / Memory Card

Note This device supports microSD (TransFlash) memory cards. A memory card is included and pre-installed with the device. Additional microSD cards can be purchased from any Verizon Wireless retail store or at the online store.

  1. Ensure the device is powered off.
  2. From the slot located on the lower left edge of the back cover, gently lift up and remove the battery cover.
    Removing battery cover
  3. From the notch in lower edge of the battery compartment, lift and remove the battery.
    Removing battery
  4. With the gold contacts facing down, insert the SD / Memory Card as shown.
    Installing the memory card
  5. Align the gold battery contacts with the contacts in the battery compartment then gently press the battery into place.
    Installing the battery
  6. Align the battery cover then gently press to snap the cover in place.
    Installing the battery


Related Topic: Remove the Memory Card