Manage Portal Settings - Delphi Connect - Android Device Portal

  1. Access the Delphi Connect device portal.
  2. Tap the Menu arrow (located in the upper-left).
    Tap the Menu arrow
  3. Tap Settings.
    Tap Settings
    Manage Modules
    Manage Alerts

Manage Modules

  1. Tap Account Settings.
    Tap Account Settings
  2. Tap Module Management.
    Tap Module Management
    Add Module
    Delete Module

Add Module

  1. Tap Add Module.
    Tap Add
  2. Enter the ESN/MEID and device registration key then tap Add.
    Tap Add

Manage Modules
Top

Delete Module
  1. Select a module.
    Select a module
  2. Tap Delete Module.
    Tap Delete Module
  3. Tap OK.

Manage Modules
Top

Manage Alerts

  1. Tap Vehicle Settings.
    Tap Vehicle Settings
  2. Select a vehicle.
    Select a vehicle
  3. Tap Reports and Alerts.
    Tap Reports and Alerts
  4. Enable all desired alerts.
    Note An alert is enabled when ON displays.
    Enable the alerts
  5. Select an option.
    Select an Option

Geofence

  1. Enable all desired geo fences.
    Note Enabled when ON displays.
    Enable a geo fence
  2. Select a geo fence (e.g., Home, etc.).
    Select a Geo Fence
  3. Select an alert option.
    Note Selected when a check mark is present.
    • Trigger When Entered
    • Trigger When Exited
    Select an Option
    Add Notification
    Delete Notification

Manage Alerts
Top

Add Notification

  1. Tap Add Notification.
    Tap Add Notification
  2. Select an option:
    • Email
    • Text message
    Select an Option
  3. Add email address or 10-digit mobile number then tap Save.
    Tap Save

Manage Alerts
Top

Delete Notification

  1. Tap the X next to the notification to be deleted.
    Tap the X to Delete
  2. Tap Save.
    Tap Save

Manage Alerts
Top

Speed

  1. Enter a new speed threshold.
    Enter a speed threshold
  2. Add or delete a notification then tap Save (located on the bottom-right).

Manage Alerts
Top

Motion

  1. Enter a new motion threshold.
    Enter a threshold
  2. Add or delete a notification then select Save (located on the bottom-right).

Manage Alerts
Top

Engine RPM

  1. Enter a new RPM threshold and RPM duration.
    Enter a threshold
  2. Add or delete a notification then tap Save (located on the bottom-right).

Manage Alerts
Top

Check Engine Light
Note There are no configuration changes available at this time.

Add or delete a notification then tap Save (located on the bottom-right).

Manage Alerts
Top

Battery Level
Note There are no configuration changes available at this time.

Add or delete a notification then tap Save (located on the bottom-right).

Manage Alerts
Top

isTealiumFlag=true