Verizon Jetpack® 4G LTE Mobile Hotspot MiFi® 6620L - Advanced Settings

To change the Advanced Settings (e.g., LAN, Port Filtering, etc.) on your Jetpack, view this info.

Caution Changing advanced settings may be harmful to the stability, performance and security of the Jetpack. Contact your local IT administrator prior to altering any of these settings.

  1. Access the Administration Web Interface.
  2. From the left menu, click Jetpack Settings Settings icon (at the center left).
  3. From the Advanced tab, click Continue.
  4. Click any of the following:

Manual DNS

Caution You may automatically assign Domain Name Server (DNS) settings by the device. If enabling manual DNS is necessary, contact your local IT administrator for assistance.

  1. To turn on, click a check mark to enable Manual DNS.
  2. From the DNS 1 IP address and DNS 2 IP address fields, enter the appropriate information.
  3. Click Save Changes (in the lower-right).

Back to Advanced Options
Top

Firewall

  1. From the VPN Passthrough mode section, select the switch to turn ON or OFF.
  2. From the IPv6 Transparent Mode section, select the switch to turn ON or OFF.
  3. Click Save Changes (in the lower-right).

LAN

  1. Enter the desired information into the following fields:
    • IP address
    • Subnet mask
    • MAC Address
    • Turn on the DHCP server by clicking a check mark to enable or disable.
    • Start DHCP address range at
    • DHCP address range
    • DHCP lease time
    • Turn on IPv6 by clicking a check mark to enable or disable.
    • Link-Local Address
  2. Click Save Changes (in the lower-right).

Back to Advanced Options
Top

isTealiumFlag=true