Configure Broadcast Settings - Mobile / Wi-Fi Hotspot - Verizon Ellipsis™ Jetpack® MHS700L

If you are experiencing connectivity issues with your Mobile Hotspot or your device isn't found, check out the steps below.

Note To avoid interference with other Wi-Fi networks, try using non-overlapping channels (i.e., 1, 6, or 11).

  1. Access the Admin Web Interface.
  2. From the left menu, click Jetpack Settings Settings icon (at the center left).
  3. Click Wi-Fi.
  4. Adjust the broadcast channel as desired then click Save Changes (lower-right).
    • Automatic (default setting) is recommended.
    • Select an alternate channel (e.g., 1-11).

 

Note Check out these FAQs for additional support on Mobile Hotspot.

isTealiumFlag=true