Configure Broadcast Settings - Mobile / Wi-Fi Hotspot - Verizon Jetpack 4G Mobile Hotspot MHS291L

If you are experiencing connectivity issues with your Mobile Hotspot or your device isn't found, check out the steps below.

Note To avoid interference with other Wi-Fi networks, try using non-overlapping channels (i.e., 1, 6, or 11).

  1. Access the Admin Web Interface.
  2. From the left menu, click Jetpack Settings (at the center left).
  3. Click Wi-Fi.
  4. Click Frequency (Channel) 2.4 GHZ.
  5. Adjust the broadcast channel as desired then click Save Changes (at the bottom right).
    • Automatic (default setting) is recommended.
    • Select an alternate channel (e.g., 1-11).
  6. Click Frequency (Channel) 5.0 GHZ.
  7. Adjust the broadcast channel as desired (149, 153, 157, 161, or 165) then click Save Changes (at the bottom right).

 

Note Check out these FAQs for additional support on Mobile / Wi-Fi Hotspot.

isTealiumFlag=true