Set Up Screen Lock - Samsung Galaxy Note® Edge

Note Notes:

  • If using Microsoft® Exchange / Corporate sync, some screen lock options (e.g., Fingerprint, Pattern, PIN) may be unavailable.
  • These steps can also be utilized to change your current screen lock setting.

 

  1. From a Home screen, tap Apps Apps icon (located in the lower-right).
    Note These instructions apply to Standard mode only.
  2. Tap Settings Settings icon.
  3. From the DEVICE section, tap Lock screen.
  4. Tap Screen lock.
    Note If presented, enter the current PIN, password or pattern.
  5. Tap one of the following:

 

Pattern

Note An unlock pattern is created then utilized to unlock the device.

  1. Draw an unlock pattern (connecting at least 4 dots) then tap Continue.
  2. Re-draw the pattern then tap Confirm.
  3. Set a backup PIN.

 

Back to Security Lock Type
Top

 

Fingerprint

Note Notes:

  • A fingerprint is utilized to unlock the device.
  • For the fingerprint scanner to operate, hands must be clean and free of moisture, dirt, oil, lotion, dyes, etc.
  • A maximum of three fingerprints can be saved on the device.

 

  1. If presented, read the Disclaimer then tap OK.
  2. Using on-screen prompts as a guide, swipe a finger downward over the Home button (oval button located below the display) 10 times.
    Note Fingerprint recognition rate is highest with finger at a 90 degree angle (swipe screen straight to ensure highest accuracy).
  3. Tap Done (located on the bottom).
  4. From the Create password prompt, enter a password (4 to 16 characters) to use as an alternative to your fingerprint then tap Continue.
  5. From the Confirm password prompt, re-enter the password then tap OK.

 

Back to Security Lock Type
Top

 

PIN

Note A PIN is created then utilized to unlock the device.

  1. Enter a numeric PIN (4 -16 digits) then tap Continue.
  2. Re-enter the numeric PIN then tap OK.

 

Back to Security Lock Type
Top

 

Password

Note A password is created then utilized to access the device.

  1. Enter a password (4 -16 characters) then tap Continue.
  2. Re-enter the password then tap OK.

 

Back to Security Lock Type
Top

isTealiumFlag=true