DuraXV / DuraXV+ by Kyocera - Auto Firmware Over-The-Air (FOTA) Upgrade

Note The device must be open for the entire process. If the device is closed at any time the upgrade fails.

  1. From the main screen, perform an over-the-air activation. For assistance refer to Performing over-the-air activation.
    Note If presented with the activation screen, select Send.
    Note Utilize the 5-way navigation pad to highlight and the center of the pad to select.
  2. Select OK.
    Note Device will restart.
  3. Select OK.
    Note Software download takes 1 to 2 minutes.
  4. Select OK.
    Note Software upgrade takes 1 to 2 minutes.
  5. Navigate Menu > Settings & Tools > Phone Info > SW/HW Version and verify the upgraded version.