Configure Bluetooth® Modem - VZAccess® Manager v6

Note If the VZAccess Manager Setup Wizard does not begin automatically, click Start > All Programs (Programs) > VZAccess Manager to launch the app. From the VZAccess Manager main screen, click Options > Run Wizard to start configuration.

  1. Click Next.
  2. Ensure the desired option is selected then click Next.
    Note If configuring a WWAN device only, skip to step 5.
    Wi-Fi / WWAN Detection screen
  3. Insert the Wi-Fi adapter then click Next.
    Note Ensure internal Wi-Fi adapter is powered on, refer to OEM user guide for assistance.
  4. Click Next.
  5. Click Next.
  6. Select the appropriate connectivity option for the device then click Next.
    Data Cable
    For handsets and Smartphone / Advanced Devices that connect using a USB cable
    PC Card, ExpressCard or USB Modem
    For PC Card, ExpressCard, or USB based modems
    Bluetooth
    For devices that support Dial-up Networking via Bluetooth®
    Note If using a connectivity option other than Bluetooth®, please refer to Configure VZAccess Manager - Windows for assistance.
  7. Ensure My device is paired and is ready to be detected is checked then click Next.
    Note Device detection may take a few moments.
    Note Refer to Create a Paired Connection - Windows for additional assistance.
  8. Click Next.
  9. Enter the 10-digit mobile number then click Next.
  10. Click Finish.
isTealiumFlag=true