Samsung Galaxy Core Prime™ - Remove SD / Memory Card

Caution Always ensure the back cover and multipurpose jack cover are closed tightly to prevent water and dust from entering the device.

  1. Ensure the device is powered off.
  2. From the back of the device, locate the notch in the cover (located on the upper-left edge) then lift the back cover from the device.
    Removing the battery cover
    Removing the battery cover
  3. From the notch in the lower right corner of the battery, lift the battery out.
  4. Slide the microSD card out.
    Note If applicable, refer to Insert the Memory Card.
  5. Align the battery contacts then gently press the battery into place.
  6. Align the back cover then gently press it into place.

Note This device supports microSD (TransFlash) memory cards which can be purchased from any Verizon Wireless retail store or at the online store.