Set Up Fingerprint Recognition - Samsung Galaxy S®6 / S 6 edge

Note Notes:

  • A fingerprint is utilized to unlock the device. For the fingerprint scanner to operate, hands must be clean and free of moisture, dirt, oil, lotion, dyes, etc.
  • Up to 4 fingerprints can be registered on the device.

 

  1. From a Home screen, navigate: Apps Apps icon > Settings Settings icon > Lock screen and security (Personal section).
    Note These instructions apply to Standard mode only.
  2. Tap Fingerprints.
    Note If presented, enter the current PIN, password, or pattern.
  3. If presented, select a lock screen option (e.g., Pattern, PIN, Password) then follow the steps to complete the process.
    Note Refer to Set Up Screen Lock for assistance.
  4. Locate the Home button below the display and place your finger on the sensor until it vibrates then lift.
    Note Repeat this step as necessary until the process is complete.
    Note For greater accuracy, finger placement should vary slightly each time.
  5. If presented, select an option then tap DONE.
    • Show content
    • Hide content
    • Do not show notifications

 

Related Topics:

isTealiumFlag=true