VZ Navigator® - 3G Basic Phone - Plan a Trip

Note Notes:

  • If necessary, update the VZ Navigator app to the latest version.
  • Images may vary depending on the device.

  1. While in VZ Navigator, select Navigation.
    Note If using a non-touchscreen device, utilize the 5-way navigation pad to highlight and the center button to select.
    Select Navigation
  2. Select Destination then press the right side of the 5-way navigation pad.
    Select Destination
  3. Enter an address then select Search or select an option.
    • Recent Searches
      • Select an option then select OK.
    • Favorites
      • Select an option then select OK.
    • Airports
      • Select an option then select Search.
    Select Search
  4. If prompted, select a specific location then select OK.
    Select OK
  5. Select Start then press the right side of the 5-way navigation pad
    Select Start
  6. Select an option (e.g., Current Location, Recent Searches, Favorites, etc.) then select OK.
    Select OK
  7. Select Route Options then press the right side of the 5-way navigation pad.
    Select Route Options
  8. Select an option the select OK.
    • Mode
      • Select an option (e.g., Car, Truck, Bicycle, etc.) then select OK.
    • Route
      • Select an option (e.g., Fastest, Shortest, Simplest, etc.) then select OK.
    • Avoid
      1. Select an option (e.g., Highways, Toll Roads, HOV Lanes, etc.) by selecting Mark
        Note Selected when a check mark is present.
      2. Press the left soft key to choose Done.
    • Traffic
      • Select an option (e.g., Alerts Only, Navigation, Disable, etc.) then select OK.
    • Navigation View
      • Select an option (e.g., 3D Perspective, 2D Top View, Dashboard, etc.) then select OK.
    • Display Places on Map
      • Select an option (e.g., Show, Hide, etc.) then select OK.
    • Apply to All Future Routes
      • Select an option (e.g., Yes, No, etc.) then select OK.
    Select OK
  9. Press the left soft key to choose Save.
    Select Save
  10. Select Navigate.
    Select Navigate
isTealiumFlag=true