Tethered Modem Connection - Samsung SCH-LC11 4G LTE Mobile Hotspot

Note To utilize USB tethered mode, a driver must be installed on the computer.

  1. Access the Administration Web Interface.
  2. From the Advanced tab, click Settings.
  3. From the Router section, select USB tethered mode.
    Note Enabled when a check mark is present.
  4. Click Save.
    Note The device restarts.
  5. Connect the device to the computer using a compatible USB cable then launch a web browser.
    Note If applicable, allow adequate time for the computer to detect the device and install the necessary software.
    Note The device is setup and functions as an Ethernet connection (no connection software required).

 

 

Download USB Driver

  1. Access the Administration Web Interface.
  2. From the Advanced tab, click Settings.
  3. From the Router and GPS over Wi-Fi (NMEA) sections, click How to use this feature.
  4. From the Driver Installation section, click the appropriate link for download then follow the step-by-step instructions to complete installation.
    • USB and GPS Driver for Windows
    • USB Driver for Mac
isTealiumFlag=true