Samsung Galaxy View - Set Up Device - Factory Reset Protection

Note Notes:

  • The following steps only apply once Factory Reset Protection (FRP) has been triggered.
  • FRP is triggered when a factory data reset is performed while the device is powered off.
  • The device can only be accessed by entering the Google account info that was used prior to the reset.

  1. If powered off, press and hold the Power button until the Samsung Galaxy View screen appears then release.
    Power button
  2. From the Welcome screen, select the appropriate language then tap NEXT (located in the lower-right).
  3. If presented with the Set up Wi-Fi screen, tap SKIP (located in the lower-right).
  4. From the Verify your account screen, enter the Google account that was previously synced on the device then tap NEXT.
  5. Enter the password then tap NEXT.
  6. From the Sign in prompt, tap SKIP
  7. From the Add your account screen, tap SKIP > SKIP.
  8. From the Name screen, enter the first and last name then tap NEXT.
  9. From the Protect your tablet screen, tap SKIP > SKIP ANYWAY.
  10. From the Google services screen, select any of the following to enable or disable then tap NEXT.
    Note Enabled when a check mark is present.
    • Use Google's location service
    • Help improve location services
    • Help improve your Android experience
  11. If presented with the Tablet Activation screen, tap NEXT.
    Note If necessary, allow several seconds for activation to complete.
  12. If presented with the Set up Wi-Fi screen, tap SKIP (located in the lower-right).
  13. From the Email setup screen, tap SKIP.
  14. From the Setup Wizard summary screen, tap DONE (located in the lower-right).
  15. If presented with the Samsung account screen, tap SKIP.

Related Topics: