Spartan GoCam™ - Install and Setup - Spartan Camera Management App

Note Notes:

  • The following steps apply to the GoWireless Premium service.
  • Ensure you've set up an account on the Spartan Camera web portal before setting up the app.
  • You can adjust camera settings, set Realtime controls, and more from the mobile app and web portal.
  • For a visual walk-through, view the Android or iOS setup videos from a web browser.

  1. On your device, download and install the Spartan Camera Management app App icon from the Google Play™ Store or Apple® App Store.
  2. Launch the app and review the quick tip then tap Close.
  3. From the menu, tap Authentication (Android) or the Camera+ icon (iOS).
  4. Tap the Plus icon + to open the authentication dialog.
  5. Enter the account ID and the access (registration) code and, if applicable, the guest code.
    Note Guests are unable to control the camera.
  6. Tap Add.
  7. Tap Authenticate.
  8. Return to the main screen. If your phone is connected to WiFi, your pictures should appear.
  9. Do the following to check and/or change settings:
    1. Tap the Menu button Menu icon (located in the upper-left).
    2. Tap Mobile Settings.
    3. From the When New Photo is Available section, tap the following to turn on or off:
      • Automatically Download
      • Download Only When WiFi is Available
        Note If set to OFF, photos download via the cellular network, which uses your plan data.
      • Show Notification
      • Play Notification Sound
    4. From the When selecting a Single Photo section, tap the following to turn on or off:
      • Confirm Delete
      • Confirm Hi-Res Request
    5. Tap Photos – Auto Purge Days then set to the preferred value.
  10. Return to the main app screen. Your photos should be visible.
isTealiumFlag=true