Moto Z Play Droid Edition - Remove SD / Memory Card

Caution Don't attempt to remove the SD / Memory Card while the device is powered on. Doing so may harm the SIM card and/or the device.

  1. Ensure that the device is powered off.
  2. From the top edge of the device (display facing up), remove the card tray.
    Note Utilize the insertion/removal tool (or a paperclip) to unlock the tray by inserting it into the provided slot (figure 1) then remove the tray (figure 2).
    Remove card tray
  3. Remove the SD / Memory Card.
    Note From the bottom of the card, carefully lift to remove. To assist, use the opening on the opposite side of the tray to dislodge (using a fingernail or similar tool).
    Note If applicable, refer to Insert the SD / Memory Card.
    Remove memory card
  4. Insert the card tray (gold contacts facing down).
    Note Press in on the tray to lock it into place.
    Insert card tray
isTealiumFlag=true