Set Up Fingerprint Recognition - Moto Z Play Droid Edition

Note Notes:

  • A fingerprint is utilized to unlock the device.
  • For the fingerprint scanner to operate, hands must be clean and free of moisture, dirt, oil, lotion, dyes, etc.
  • Up to five fingerprints can be registered on the device.

 

  1. From a Home screen, navigate: Apps icon Apps icon > Settings Settings icon > Security & Location.
  2. From the Device Security section, tap Fingerprint.
  3. Tap NEXT (lower-right).
    Note If presented, enter the current PIN, password, or pattern.
  4. If presented with a lock screen notification, tap SET UP SCREEN LOCK.
    Note Refer to Set Up Screen Lock for assistance.
  5. Locate the fingerprint sensor below the display then tap NEXT (lower-right).
  6. Review the info then tap NEXT.
  7. Place your finger on the sensor until it vibrates then lift.
    Note Repeat this step as necessary until the process is complete.
    Note For greater accuracy, finger placement should vary slightly each time.
  8. Tap NEXT or DONE.
  9. If presented, review the info then tap GOT IT.
isTealiumFlag=true