Set Up Fingerprint Recognition - LG Stylo™ 2 V

Note Notes:

  • A fingerprint is utilized to unlock the device.
  • For the fingerprint scanner to operate, hands must be clean and free of moisture, dirt, oil, lotion, dyes, etc.
  • Up to 5 fingerprints can be registered on the device.

 

  1. From a Home screen, navigate: Settings Settings icon > Fingerprints & security.
    Note These instructions apply to Standard mode only.
  2. Tap Fingerprints.
  3. From the Add your fingerprint screen, tap Next (located in the lower-right).
    Note If presented, enter the current PIN, password, or pattern.
  4. If presented, select a lock screen option (e.g., Pattern, PIN, Password) then follow the steps to complete the process.
    Note Refer to Set Up Screen Lock for assistance.
  5. Place your finger on the Home button (on the back of the device), lift it slightly then place a different part of your finger on the Home button.
    Note Repeat this process as necessary until the "Fingerprint added" screen appears.
  6. Tap OK (located in the lower-right).
  7. Tap the Screen lock switch to turn on Switch On icon or off Switch Off icon.
  8. Tap the Content lock switch to turn on Switch On icon or off Switch Off icon.
    Note When on, follow the onscreen instructions to set up an additional lock option (e.g. pattern, etc.).

 

Related Topics:

isTealiumFlag=true