Add Additional Fingerprints - Kyocera DuraForce PRO with Sapphire Shield

Note Notes:

  • A fingerprint is utilized to unlock the device.
  • For the fingerprint scanner to operate, hands must be clean and free of moisture, dirt, oil, lotion, dyes, etc.
  • Up to 4 fingerprints can be registered on the device.

 

  1. From a Home screen, navigate: Apps Apps Icon > Settings Settings Icon > Lock screen (Personal section).
  2. Tap Fingerprint.
    Note If presented, enter the current PIN, password, or pattern.
  3. Tap Add fingerprint.
  4. Place your finger on the sensor until it vibrates then lift.
    Note Repeat this step as necessary until the process is complete.
    Note For greater accuracy, finger placement should vary slightly each time.
  5. Enter a name for the finger print then tap Done.

 

Related Topic: Remove Saved Fingerprints

isTealiumFlag=true