Kyocera DuraForce PRO with Sapphire Shield - Set Up Fingerprint Recognition

Note Notes:

  • A fingerprint is utilized to unlock the device.
  • For the fingerprint scanner to operate, hands must be clean and free of moisture, dirt, oil, lotion, dyes, etc.
  • Up to four fingerprints can be registered on the device.

  1. From a Home screen, navigate: Apps Apps icon > Settings Settings icon > Lock screen (Personal section).
  2. From the Device security section, tap Fingerprint.
    Note If presented, enter the current PIN, password, or pattern.
  3. Tap Continue.
  4. Select the backup screen lock method.
    • Pattern
    • PIN
    • Password
  5. Select a notifications option then tap Done.
    • Show all notifications content
    • Hide sensitive notification content
    • Don't show notifications at all
  6. Tap Next.
  7. Place your finger on the sensor until it vibrates then lift.
    Note Repeat this step as necessary until the process is complete.
    Note For greater accuracy, finger placement should vary slightly each time.
  8. Enter a name for the finger print then tap Done.

Related Topic: Remove Saved Fingerprints