Kyocera DuraForce PRO with Sapphire Shield - Manage Mobile / Wi-Fi Hotspot Settings

 

  1. From a Home screen, navigate: Apps Tap the Apps Icon > Settings Tap Settings.
  2. Tap Mobile Hotspot.
  3. From the Mobile Hotspot screen, select an option:

 

Set Up Mobile Hotspot

  1. Tap Set Up Mobile Hotspot.
  2. From the Set Up Mobile Hotspot screen, configure the following as needed:
    • Network SSID
    • Hide my device
      Note Enabled when a checkmark is present.
    • Security
      • Open
      • WPA2 PSK
        Note Password protected (recommended to prevent unauthorized access to your hotspot).
    • Password
      Note Password can be changed.
    • Show password
      Note Enabled when a checkmark is present.
    • Broadcast Channel
  3. Tap SAVE.

 

Note Check out these FAQs for additional support on Mobile Hotspot.

 

Top

 

Manage devices

  1. From the Mobile Hotspot screen, tap the Menu icon Tap the Menu Icon (located in upper-right).
  2. Tap Advanced.
  3. To set allowed devices, tap Manage devices.
  4. Tap Allow all devices to enable or disable.
    Note Restricts which devices are allowed to connect when disabled (unchecked).
    Note To add a device:
    1. Tap Add to allowed devices then select one of the following options:
      • Enter MAC address of the device
        • Enter the name and MAC address then tap OK.
      • Choose from connected devices
        • Choose a device from the list then tap OK.

 

Note Check out these FAQs for additional support on Mobile Hotspot.

 

Top

 

Timeout settings

  1. From the Mobile Hotspot screen, tap the Menu icon Tap the Menu Icon (located in upper-right).
  2. Tap Advanced.
  3. Tap Timeout settings.
    Note Sets how long before the hotspot will turn off after no activity.
  4. Select an option:
    • Never turns off
    • 5 min
    • 10 min
    • 20 min
    • 30 min
    • 60 min
  5. Tap the Back button (lower-left).

 

Note Check out these FAQs for additional support on Mobile Hotspot.

 

Top

isTealiumFlag=true