Kyocera DuraForce PRO with Sapphire Shield - Remove SIM Card

Instructions on inserting/removing your SIM can help with activation issues/errors, browser connection problems and a blank/frozen screen.

Caution Don't attempt to remove the SIM card while the device is powered on. Doing so may harm the SIM card and/or the device.

  1. Ensure the device is powered off.
  2. Remove the back cover by inserting your fingernail in the slit on the phone and pulling away from the phone.
    Remove cover
  3. From the left edge of the device (display facing down), open the SIM/microSD card slot cover.
    Open SIM cover
  4. Press in on the SIM card to release, then remove it.
    Note If applicable, refer to Insert the SIM Card.
    Insert SIM card
  5. Close the SIM/microSD card slot cover.
    Note Press from the bottom to the top of the cover to lock it in place.
    Warning Ensure the SIM/microSD slot cover is properly sealed to maintain the phone's waterproof capability.
    Close cover
  6. Replace the back cover. Press around the edges to ensure a proper fit.
    Replace cover


Note Check out this interactive demo for more info.