Remove SD Card - Kyocera DuraForce PRO with Sapphire Shield

Note This device supports microSD (TransFlash) memory cards. Memory cards can be purchased from any Verizon Wireless retail store or at the online store.

  1. Ensure the device is powered off.
  2. Remove the back cover by inserting your fingernail in the slit on the phone and pulling away from the phone.
    Remove cover
  3. From the left edge of the device (display facing down), open the SIM/microSD card slot cover.
    Open SIM cover
  4. Press in to release, then remove the card from the slot.
    Note If applicable, refer to Insert the Memory Card.
  5. Close the SIM/microSD card slot cover.
    Note Press from the bottom to the top of the cover to lock it in place.
    Warning Ensure the SIM/microSD slot cover is properly sealed to maintain the phone's waterproof capability.
    Close cover

 

Note Check out this interactive demo for more info.

isTealiumFlag=true