Hum x by Verizon - Bluetooth® Discovery Mode

Note Before attempting to pair the speaker with the phone, ensure:

  • The speaker is charged but NOT currently plugged into the charger.
  • The OBD reader is installed in the vehicle and you are within 10 feet of it.
  • You are not currently on a call.

  1. Start the vehicle's engine.
  2. On the Speaker, move the Hands-free switch to the on position.
    Note Review power the speaker on or off for specific steps.
  3. Press and hold the Call button for about 3 seconds or until the LED ring around the speaker begins to flash blue.
    Note To pair with a phone, refer to these instructions.
    Speaker front view

Note For additional info, check out these Bluetooth FAQs and Hum FAQs.