Remove SD (Memory) Card - HP Elite x2 1012

Note This device supports microSD (TransFlash) memory cards. Memory cards can be purchased from any Verizon Wireless retail store or at the online store.

  1. Ensure the device is powered off.
  2. From the right edge of the device, remove the SD (Memory) Card tray (located above the SIM card tray).
    Note Utilize a paperclip (or similar tool) to unlock the tray by inserting it into the provided slot (figure 1) then remove the tray (figure 2).
    Remove SD (Memory) Card tray
  3. Remove the SD (Memory) Card from the tray as shown.
    Note From the bottom of the card, carefully lift to remove.
    Note If applicable, refer to Insert the Memory Card.
    Remove SD (Memory) Card
  4. Insert the SD (Memory) Card tray.
    Note Press in on the tray to lock it into place.
    Insert SD (Memory) Card tray