Verizon Jetpack® MiFi® 7730L - LAN Settings

View this info to configure advanced LAN settings (e.g., IP address, Subnet mask, DHCP address range, etc.) for your Jetpack.

Caution Changing advanced settings may be harmful to the stability, performance, and security of the Jetpack. Contact your local IT administrator prior to altering any of these settings.

  1. Access the Admin Web Interface.
  2. From the left menu, click Jetpack Settings.
  3. From the Advanced tab, click Continue (located on the right).
  4. Click LAN (located below the Advanced tab, to the right).
  5. From the IPv4 section, enter the desired info into the following fields:
    • IP address
    • Subnet mask
    • MAC Address
    • Turn on DHCP server
      Note On when a check mark is present.
    • DHCP lease time
    • Start DHCP address range at
  6. Click Save Changes (located in the lower-right).