HTC 10™ - Add Additional Fingerprints

Note Notes:

  • A fingerprint is utilized to unlock the device.
  • For the fingerprint scanner to operate, hands must be clean and free of moisture, dirt, oil, lotion, dyes, etc.
  • Up to five fingerprints can be registered on the device.

  1. From a Home screen, navigate: Apps icon Apps icon > Settings Settings icon > Fingerprint scanner (Device section).
  2. Tap Add fingerprint.
    Note If presented, enter the current PIN, password, or pattern.
  3. Locate the fingerprint sensor below the display then tap START (located in the lower-right).
  4. Place your finger on the sensor until it vibrates then lift.
    Note Repeat this step as necessary until the process is complete.
    Note For greater accuracy, finger placement should vary slightly each time.
  5. Tap NEXT or DONE.

Related Topic: Remove Saved Fingerprints