Restore Settings to Factory Defaults - Ellipsis® Jetpack® - MHS900L

If your Jetpack powers off on its own, crashes and resets, freezes, won't charge or runs slow, view this info.

Note To complete a soft or power reset, refer to these instructions.

Caution Restore Settings to Factory Defaults only if absolutely necessary as it removes all modified settings including Network Name (SSID), Wi-Fi/Admin Password, etc.

  1. Remove the battery cover.
  2. Ensure device is powered on.
  3. Press the Reset button (using a paperclip or similar tool) for 10 seconds.
    Reset Button
  4. "Factory Reset Restarting Jetpack" appears on the display once the button is released.
    Note After restoring to factory defaults, ensure Power Management Settings are set to the preferred options.

 

If the steps above aren't working, follow the alternate steps below.

  1. Access the Admin Web Interface.
  2. From the left menu, click Jetpack Settings.
  3. Click Jetpack.
  4. From the 'Jetpack' options, click Factory reset.
  5. Click Restore Factory Default.
  6. Click Confirm.
    Note After restoring to factory defaults, ensure Power Management Settings are set to the preferred options.
isTealiumFlag=true