LAN Settings - Ellipsis® Jetpack® - MHS900L

View this info to configure advanced LAN settings (e.g., IP address, Subnet mask, DHCP address range, etc.) for your Jetpack.

Caution Changing advanced settings may be harmful to the stability, performance and security of the Jetpack. Contact your local IT administrator prior to altering any of these settings.

  1. Access the Admin Web Interface.
  2. From the left menu, click Jetpack Settings.
    Jetpack Settings
  3. From the Advanced tab, click LAN.
    Note If a warning message appears when clicking the Advanced tab, read it then click Continue.
    LAN
  4. Enter the desired info into the following fields:
    • IP address
    • Subnet mask
    • MAC address
    • Enable DHCP server by selecting ON/OFF to enable or disable.
    • DHCP address range
    • Enable IPv6 by selecting ON/OFF to enable or disable.
    Jetpack Settings Advanced LAN select the fields and enter the desired information
  5. Click Save Changes (located in the lower-right).
isTealiumFlag=true