Remove SIM - Wireless Home Phone T2000

Note Wireless Home Phone T2000 comes with the SIM card installed.

  1. Remove the battery cover.
    Remove the battery cover
  2. Disconnect the battery cable then remove the battery.
    Remove battery
  3. Gently push in on the card, then carefully pull out the SIM card.
    Note If applicable, refer to Insert the SIM Card.
    Note The following image is showing the physical location of the SIM tray and is for informational purpose only.
    Remove SIM
  4. Connect the battery cable to the socket on the device then insert the battery as shown.
    Connect the battery
  5. Replace the battery cover.
    Close the battery cover
isTealiumFlag=true