Activate / Set Up Device - Wireless Home Phone T2000
Electrical equipment can cause interference with Home Phone Connect. Avoid placing Home Phone Connect near other electrical equipment such as a refrigerator, television or microwave oven.
Wireless Home Phone T2000 comes with the SIM card installed.
Customers transferring in their home number can't make or receive calls on the Wireless Home Phone until the transfer process is completed. The transfer process can take 2 – 10 business days. Check the status of your transfer by visiting verizonwireless.com/LNP or by calling 877.567.4899.
If needed, attach the antenna.
Antenna sold separately and can be purchased from any Verizon Wireless retail store or at the online store.
Wireless Home Phone T2000 works without it in a normal environment. You can choose to buy the external antenna if you're planning to put this device where signal might be weak, like in the basement.
Connect the power adapter to the device then plug it into an AC power outlet.
Disconnect the home telephone from the wall jack.
Connect the home telephone to the device.
Don't plug the Home Phone Connect into the telephone wall jack.
Press the Power button (located at the back of the unit) to turn on the Wireless Home Phone.
The power indicator turns blue when device is turned on.
Place a call to start using the service.
Ensure at least one of the signal strength indicator bars is lit up. If no bars are lit, move the Wireless Home Phone to get a stronger signal.
You may need to use the three-digit area code when dialing local and long distance numbers.