Arlo Go - Insert SD / Memory Card

Note Notes:

  • This device supports a microSD memory card (SDHC or SDXC only) with up to 32 GB capacity, file format FAT32.
    Note For best performance, class 4 or higher is recommended.
  • Memory cards can be purchased from any Verizon Wireless retail store or at the online store.

  1. Ensure the camera is disconnected from the power adapter.
  2. Open the battery door.
    Note Press and hold the latch (located on the top edge) then rotate the door down.
  3. If present, remove the battery as shown.
    Note Utilizing the notches on both sides, pull to remove.
    Remove battery
  4. Insert the card as shown (gold contacts facing up).
    Insert SD / Memory Card
  5. If applicable, insert the battery as shown.
    Note Ensure that the connectors on the battery align with the connectors on the device.
    Insert battery
  6. Close the battery door.
    Note Rotate the door up and ensure it locks into place.
    Close battery door

Related Topic: Remove the SD / Memory Card