moto e4 - Set Up Fingerprint Recognition

Note Notes:

  • A fingerprint can be used to unlock devices that have a fingerprint scanner.
  • For the fingerprint scanner to operate, hands must be clean and free of moisture, dirt, oil, lotion, dyes, etc.
  • Up to five fingerprints can be registered.

  1. From a Home screen, swipe up to access all apps.
  2. Navigate: Settings Settings icon > Security.
  3. From the Device Security section, tap Fingerprint.
  4. Tap NEXT.
    Note If presented, enter the current PIN, password or pattern.
  5. If presented with an 'Unlock selection' screen, select a backup lock option:
    Note Refer to Set Up Screen Lock for assistance.
    • Fingerprint + Pattern
    • Fingerprint + Pin
    • Fingerprint + Password
  6. If presented with the 'Secure start-up' screen, select an option:
    • Require pattern/PIN/password to start device
    • No thanks
  7. Locate the fingerprint sensor below the display then tap NEXT (lower-right).
  8. Review the info then tap NEXT.
  9. Place your finger on the sensor until it vibrates then lift.
    Note Repeat this step as necessary until the process is complete.
    Note For greater accuracy, finger placement should vary slightly each time.
  10. Tap NEXT.
  11. If presented, review the info then tap GOT IT.

Related Topics: