Motorola moto e4 plus
moto e4 plus - Set Up Fingerprint Recognition
moto e4 plus™ - Set Up Fingerprint Recognition
A fingerprint is utilized to unlock the device.
For the fingerprint scanner to operate, hands must be clean and free of moisture, dirt, oil, lotion, dyes, etc.
Up to five fingerprints can be registered on the device.
From a Home screen, swipe up to access all apps.
From the Device Security section, tap
If presented, enter the current PIN, password or pattern.
If presented with an 'Unlock selection' screen, select a backup lock option:
Set Up Screen Lock
Fingerprint + Pattern
Fingerprint + Pin
Fingerprint + Password
If presented with the 'Secure start-up' screen, select an option:
Require pattern/PIN/password to start device
Locate the fingerprint sensor below the display then tap
Review the info then tap
Place your finger on the sensor until it vibrates then lift.
Repeat this step as necessary until the process is complete.
For greater accuracy, finger placement should vary slightly each time.
If presented, review the info then tap
Add Additional Fingerprints
Remove Saved Fingerprints
Connect with us on Messenger
Visit Community Forums
24/7 automated phone system: call *611 from your mobile