ZTE Cymbal® LTE - Remove SD / Memory Card

Note Notes:

  • This device supports microSD (TransFlash) memory cards. Memory cards can be purchased from any Verizon Wireless retail store or at the online store.
  • Check out this interactive demo for more info.

  1. Using the notch (lower-left edge, when the device is face down) gently lift and remove the battery cover.
    Remove battery cover
  2. From the notch in the upper edge of the battery compartment, lift and remove the battery.
    Remvoe battery
  3. Press the soft block down and slide the SD / Memory Card card out.
    Note If applicable, refer to Insert the Memory Card.
    Remove SD / Memory Card
  4. Align the gold battery contacts with the contacts in the battery compartment then gently press the battery into place.
    Insert battery
  5. Align the battery cover then gently press to snap the cover into place.